according to a recent announcement of CNCA, business scope of the following accredited testing laboratories for China CCC products was updated as follows:
 
Zhejiang Fangyuan Testing Co. Ltd.
CNCA-C02-01: Circuit Switch and Electrical Equipment for Protection or Connection (Electrical Accessories)
 
Zhejiang Kezheng Electronic Information Product Testing Co. Ltd.
CNCA-C08-01: Audio and video equipment
CNCA-C09-01: Information Technology Equipment
CNCA-C16-01: The following products in telecom terminal equipment
 
Guangdong Jingzheng Testing Co. Ltd.
CNCA-C22-02: Toy Products
 
Jiangsu Jingrui Testing Technology Co. Ltd.
CNCA-C11-07:The following products in household and similar equipment
CNCA-C11-09: Automotive interior parts
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to the China News Service Beijing on May 16 that the research and development center set up by Geely Automobile Group in Raunheim, Germany, has officially started its operations. The R&D center is close to Frankfurt Airport in Germany and will form a R&D team with about 300 engineers in the future to accelerate the technological development and business development of Geely Automobile Group in the new energy field. According to reports, the establishment of Geely Germany R&D Center will further improve Geely's global engineering research and development system. At present, Geely Automobile Group has five R&D centers. In addition to the above-mentioned new institutions, Geely Automobile Research Institute in Hangzhou Bay, Ningbo, China, Geely Automobile Europe R&D Center (CEVT) in Gothenburg, Sweden, and Hangzhou, China. R&D center in Coventry, UK. At present, Geely Automobile Group has more than 20,000 R&D designers, of which more than 2,500 are R&D experts in the field of new energy.

Motor vehicle and a list of vehicle components need a China Compulsory Certification in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: CAAM News

 

According to a recent announcement from the China Certification and Accreditation Administration ("CNCA"), CURC Certification for Urban Rail Transit Equipments were introduced. Relevant implementation rules are as follows:
 
CNCA-CURC-01:2019: Urban Rail Transit Equipment Product Certification Implementation Rules General Requirements
CNCA-CURC-02:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicles
CNCA-CURC-03:2019: Urban Rail Transit Equipment Product Certification Implementation Rules Specific Requirements - Urban Rail Transit Braking System
CNCA-CURC-04:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit traction drive system
CNCA-CURC-05:2019: Urban rail transit equipment product certification implementation rules Specific requirements—urban rail transit electric bus train control and diagnosis system
CNCA-CURC-06:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicle doors
CNCA-CURC-07:2019: Urban rail transit equipment product certification implementation rules Specific requirements - urban rail transit vehicle coupler buffer
CNCA-CURC-08:2019: Urban rail transit equipment product certification implementation rules Specific requirements—urban rail transit communication-based train operation control system (CBTC)
 
CURC Certification is similar as China Compulsory Certification (China CCC), a positive result of both type test of product and factory inspection are necessary in order to get the Certificate.
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us
 

business scopes of selected test laboratories for China CCC products were updated and released by the CNCA on 18.April 2019.

Tianjin Motorcycle Quality Supervision and Inspection Institute (National Motorcycle Quality Supervision and Inspection Center (Tianjin))
 
CNCA-C11-02: Motorcycle
CNCA-C11-07: The following products in automotive exterior lighting and light signal devices - motorcycle exterior lighting and light signal devices
CNCA-C11-08: Indirect view device for motor vehicles
CNCA-C11-15: Motorcycle occupant helmet
CNCA-C11-16: Electric bicycle
 
Yangzhou Import and Export Toys Inspection Institute of the People's Republic of China
 
CNCA-C22-01: Baby carriage products
CNCA-C22-02: Toy Products
 
Machinery Industry Special Automotive Product Quality Testing Center
 
CNCA-C11-01: The following products in the car - special car
CNCA-C11-09 automotive interior parts
 
Jiangsu Yike Testing Technology Service Co., Ltd.
 
CNCA-C11-09: Automotive interior parts
CNCA-C22-01: Baby carriage products
CNCA-C22-03: restraint system for motor vehicle child occupants
 
Foshan Quality Measurement Supervision and Testing Center
 
CNCA-C04-01: The following products in low-power motors--small power motors covered by GB12350
CNCA-C07-01: The following products in household and similar applications - household refrigerators and food freezers, electric fans, air conditioners, household electric washing machines, electric water heaters, room heaters, vacuum cleaners, skin and hair care Appliances, electric irons, induction cooktops, electric ovens, electric food processing appliances, microwave ovens, electric cooktops, cooktops, ovens and similar appliances, range hoods, liquid heaters, hot and cold water dispensers, rice cookers
CNCA-C11-15: Motorcycle occupant helmet
CNCA-C21-01: The following products in the decoration and decoration products--solvent wood coating, porcelain brick
CNCA-C11-08: The following products in the indirect vision device of motor vehicles - car rearview mirror
CNCA-C11-09: Automotive interior parts
CNCA-C11-10: car door locks and door retainers
CNCA-C11-12: car seat and seat headrest
CNCA-C11-16: Electric bicycle
 
Guangdong Entry-Exit Inspection and Quarantine Bureau Inspection and Quarantine Technology Center
 
CNCA-C04-01: The following products in low-power motors--small power motors covered by GB12350
CNCA-C07-01: The following products in household and similar applications - electric fans, indoor heaters, vacuum cleaners, skin and hair care appliances, electric irons, electric ovens, electric food processing appliances, liquid heaters and hot and cold Drinking fountain, rice cooker
CNCA-C10-01: Lighting Appliances
CNCA-C07-01: The following products in household and similar equipment - household refrigerators and food freezers, air conditioners, household electric washing machines, electric water heaters, induction cookers, microwave ovens, electric stoves, cooktops, ovens and Similar appliances, range hood
CNCA-C22-01: The following products in baby stroller products - toy bicycles, electric baby carriages, other toy vehicles
CNCA-C22-02: Toy Products
CNCA-C11-09: Automotive interior parts
CNCA-C22-01: The following products in the stroller products - children's bicycles, children's tricycles, strollers, baby walkers
CNCA-C22-03: restraint system for motor vehicle child occupants
CNCA-C21-01: The following products in the decoration products - solvent wood coating
 
Dalian Product Quality Supervision and Inspection Institute
 
CNCA-C01-01: The following products in wire and cable - rubber insulated wire and cable and PVC insulated wire and cable with rated voltage of 450/750V and below (except GB/T 5013.8 covered models, 60227 covered by GB/T 5023.6) IEC 71c (TVV) model product)
CNCA-C03-01: Low-voltage switchgear (short-time withstand current 420V 80kA 1s and below)
CNCA-C03-02: The following products in low-voltage components (short-circuit current strength 420V 80kA and below)--Low-voltage circuit breakers, low-voltage switches (isolators, isolating switches and fuse combinations), low-voltage electromechanical contactors and motors Starter, electromechanical control circuit appliance, AC semiconductor motor controller and starter, MCB
 
For general information on the China CCC (China Compulsory Certification) please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

According to a recent press from the State Council of P.R.C, 21 new and revised GB Standards ("GB", "GuoBiao") were released on 04 April 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products.

GB 5920-2019: Light distribution performance of front and rear position lights, position lights and brake lights for automobiles and trailers 
replaced GB: 5920-2008
implementation date: 2020-01-01
 
GB 15742-2019: Performance requirements and test methods for horns for motor vehicles 
replaced GB: GB 15742-2001 
implementation date: 2020-01-01
 
GB 23255-2019: Light distribution performance of motor vehicles' daytime running lights 
replaced GB: GB 23255-2009 
implementation date: 2020-01-01
 
You can finde here more new and revised GB Standards.
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 

 

According to a recent press from the State Council of P.R.C, 177 new and revised GB Standards ("GB", "GuoBiao") were released on 25 March 2019 by the Standardization Administration of the People's Republic of China (SAC) . Here are a list of GB Standards which are relevant to automobile products.
 
GB/T 3316-2019 diesel locomotive power determination method
implementation date: 2019-07-01
 
GB/T 5359.1-2019 Motorcycle and moped terms - Part 1: Vehicle type
implementation date: 2019-10-01
 
GB/T 37285-2019 Motor vehicle brake fluid compatibility test reference fluid
implementation date: 2019-10-01
 
GB/T 37293-2019 Urban public facilities Electric vehicle charging and replacing facilities operation management service specification
implementation date: 2019-10-01
 
GB/T 37336-2019 car brake drum
implementation date: 2019-10-01
 
GB/T 37337-2019 Passenger protection for side column collision of automobiles
implementation date: 2019-10-01
 
GB/T 37338-2019 Electric motorcycle and electric moped instrument
implementation date: 2019-10-01
 
GB/T 37340-2019 electric vehicle energy consumption conversion method
implementation date: 2019-10-01
 
More new and revised chinese GB Standards please see here
 
Motor vehicle and vehicle components need China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 
 
The Daimler Group will invest 500 million euros (approximately $589 million) in the Ambauk plant in France to produce a compact Mercedes-Benz electric vehicle. In order to better cope with the increasingly fierce market competition, Daimler plans to produce more than 10 electric models for Mercedes-Benz by 2022. According to reports, the Angbach plant has an annual production capacity of more than 80,000 units. It currently produces two models of the internal combustion engine and electric vehicles of the Smart brand. A Daimler spokesperson said Mercedes is adjusting its platform to produce electric vehicles on the same lines as gas, diesel and hybrids. At present, Mercedes produces A-class, B-class and GLA compact models at the Rastach plant in Germany, Kecskemet in Hungary, Beijing and Aguascalientes in Mexico, which totally produced 620,000 cars in the last year. In September last year, Mercedes-Benz showed the Concept EQA electric concept car. After a single charge, the EQA can travel for 400 kilometers. With a fast charger, EQA can regain 100 kilometers or 62 miles every 10 minutes. In addition to standard wall charging, EQA will also be compatible with inductive charging systems. It is reported that in 2019, Mercedes-Benz is preparing to produce EQC, an electric SUV model, in Bremen, Germany. The model will be shared with Mercedes-Benz's best-selling SUV model GLC. Last year, thanks to the market popularity of GLC and GLA models, Mercedes-Benz sold a total of 805,000 SUVs.
 
Motor vehicle and a list of vehicle components need a China Compulsory Certification (China CCC) in order to enter into the chinese market. If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.
 
Source: CAAM News
according to a recent announcement of CNCA (China National Certification and Accreditation Administration), some test requirements for automobile products of China CCC Certification were updated. The following GB Standards came into force on 12th. March 2019, i.e.:
 
GB 19260-2016 Low floor and low entrance city bus structure requirements
GB 22757.2-2017 Lightweight Vehicle Energy Consumption Marking Part 2: Externally Chargeable Hybrid Electric Vehicles and Pure Electric Vehicles
GB 26149-2017 Performance requirements and test methods for passenger car tire pressure monitoring systems (Article 5.1 If the vehicle has been confirmed to meet the standard requirements, its components may not be separately requested.)
GB 34655-2017 passenger car fire extinguishing equipment configuration requirements
GB 34659-2017 Performance requirements and measurement methods for anti-splash systems for automobiles and trailers
GB 34660-2017 Road vehicles Electromagnetic compatibility requirements and test methods (only vehicle test. In the transition period specified by the standard, according to the applicant's wishes, according to this standard or GB 14023.)
Safety technical conditions for GB 36220-2018 oil transportation vehicles and refueling vehicles
GB/T 34657.2-2017 Electrical Vehicle Conductive Charging Interoperability Test Specification Part 2: Vehicles
GB/T 34658-2017 communication protocol conformance test between electric vehicle non-vehicle conductive charger and battery management system
 
For general information on the China CCC (China Compulsory Certification) please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top