New Chinese GB Standard GB 19152-2016 engine vehicle headlamps asymmetric passing beam or a beam or both was released on 30 December 2016 and entered into force on 1 January 2017. This has replaced the standard GB 19152-2003 and a part of GB 5948-1998. If your products have already been certified before the introduction of the new standard, it is necessary to perform extra tests with the new standard.

For more information, see CCAP News.

For general information about the CCC please look at chapter CCC through CCC Procedure. If you have any questions, please contact u

Recently, China Inspection and Quarantine Bureau ("CIQ"), Hefei Airport Office of AnHui, has reviewed a shipment of switches that have been exported to China and determined that the product has a valid CCC certificate but no valid mark approval (" Permission of Printing "). This violates the requirements of "China Certification and Accreditation Regulation" and "CCC Product Certification Management Regulation". After no effective measures were taken by the export company, the products were scrapped by CIQ (Source: CNCA News).

We support you in preparing your business for certification. We support you in the necessary activities so that you get a quick, efficient and qualitative certification. 
For general information about the CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

CNCA ("Certification and Accreditation Administration of PRC") published a list of test centers for CCC products on 5 January 2018:

Laboratory no.

Name

Business Scope

00901

Shanghai Testing & Inspection Institute for Electrical Equipment

CNCA-C03-01:Low-voltage switchgear and low voltage electrical equipment

CNCA-C03-02:Apparatus and Low-voltage Components

CNCA-C04-01:Small-power Motors

CNCA-C06-01:Electric Welding Machine

04901

National Passenger Car Quality Supervision and Inspection Center

CNCA-C11-01:Vehicles

CNCA-C11-04:Safety belts of vehicles

CNCA-C11-05:Horn for motor vehicles

CNCA-C11-06:Braking hose for motor vehicles

CNCA-C11-07:Exterior lighting and light-signal device for motor vehicles 

CNCA-C11-08:Indirect vision device for motor vehicles

CNCA-C11-09:Interior trimming material of vehicles

CNCA-C11-10:Door lock and door retention components of vehicles

CNCA-C11-11:Fuel tank for vehicles

CNCA-C11-12:Seats and head restraints for vehicles

CNCA-C11-13:Reflecting signs of vehicle body

CNCA-C12-01:Tires

CNCA-C22-03:Restraining devices for child occupants of power-driven vehicles

05201

China National Construction Machinery Quality Supervision Testing Center

CNCA-C11-01:Vehicles, Type N, O

CNCA-C11-05:Horn for motor vehicles

CNCA-C11-06:Braking hose for motor vehicles

CNCA-C11-07:Exterior lighting and light-signal device for motor vehicles 

CNCA-C11-08:Indirect vision device for motor vehicles

CNCA-C11-09:Interior trimming material of vehicles

CNCA-C11-11:Fuel tank for vehicles

CNCA-C11-12:Seats and head restraints for vehicles

19301

Jiangsu CIQ Testing Center

CNCA-C04-01:Small-power Motors

Further information can be found at  CNCA Announcement (no.01. 2018)

Audi is reversing the trend and is selling more cars in China again. Previously, the VW subsidiary in Ingolstadt suffered a sell-down in its most important market. The reason was a conflict with local traders.

Ingolstadt Audi is back on track for growth in China after settling the dispute with the car dealers. The Ingolstadt-based VW subsidiary sold nearly 52,000 cars in its most important market in June, 1.7 percent more than a year ago. Due to the conflict with the dealers, the sales had shrunk for six months. That's why Audi sold only 909,000 cars in the first half of the year - 4.7 percent fewer than in the same period last year.

Sales Director Dietmar Voggenreiter said on Friday: "June has confirmed that the trend for Audi is developing positively in all regions of the world. After a difficult first half of the year, we expect a stronger second half of the year given the current order situation. "The new flagship A8, which celebrates its world premiere next week and will be launched towards the end of the year, should also contribute to this. Worldwide, Audi sold almost 171,000 cars in June - 1.0 percent more than a year ago. In Europe, the group grew a good two percent, in the US even more than five percent.

Voggenreiter sees the reorganization in China as a "door opener to the market potential of the coming decade". Audi wants to build and sell cars in China not only with the FAW Group, but also with the SAIC Group as the second partner. This had greatly unsettled the previous dealers. Audi agreed a joint dealer and sales network with all those involved at the end of May.

you can find the whole article here

Following the announcement of CNCA (No.43, 2017), the Chinese certification body CAQC in Tianjin will be granted further certification rights. The exact certification scope is shown below:

Scope of certification

Certification Authority

Come into effect

CNCA-C11-01: electric car (only for china wide)

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-04: Seat belts for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-05: Horns for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-06: Brake hoses for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-07: Headlight for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-08: Rear view mirror for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-11: fuel tank

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-12: Seats and headrests for vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C22-03: Child seats in motor vehicles

CAQC Certification Co., Ltd.

29.12.2017

CNCA-C11-09: interior lining material for vehicles

CAQC Certification Co., Ltd.

30.12.2015

CNCA-C11-10: Door locks and door hinges for vehicles

CAQC Certification Co., Ltd.

30.12.2015

We support you in preparing your business for certification. We support you in the necessary activities so that you get a quick, efficient and qualitative certification. For general information about the CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

Source: CNCA, CAQC

On 22.12.2017, AQSIQ (General Administration of Qua- lity Supervision, Inspection and Quarantine of the PRC) has announced that as of 05.02.2018 there will be a recall for a potential hazard with the power steering parts from Mercedes in China. Affected are models of the A, B, C, E class and Mercedes GLA, GLC SUV, GLK from the years of construction from 2011 to 2017.

Source:
AQSIQ

In China, play mat and puzzle mat products for children now require CCC certification. The products must be certified to 30.11.2018 according to the implementation regulation CNCA-13C and GB standard GB6675 CCC. Products without CCC may not be placed on the Chinese market from 1.12.2018. If you have any questions, please contact the contact.

Source: CNCA Announcement No. 41, 201

Works that only produce CCC-relevant spare parts ("spare part") do not need to be audited annually. However, certain conditions must be fulfilled. For factories that produce spare parts only in the first year and do not produce within the next four years, the surveillance audit will in principle be made at least once within the entire 5 years. If you have any questions, please contact the contact.

Source:
CCAP News (05.06.2017)

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top